Vacuum Pump Accessories

Specification Inner diameter: 6 mm Outer diameter: 12 mm Length: 1m

For Rocker 300/400/410/430/500 The vacuum regulator/moisture trap which includes the Prote™ Filter Cartridge is a replacement part for the Rocker 3...

This air filter which connects inline between the vacuum pump and the vacuum system traps particles as small as 40 microns. The filter can also han...

The filter cartridge located in the air inlet removes particles and moisture to prolong the life of the pump.

The Rocker series pumps are equipped with Prote™ overflow protection which can prevent large amounts of liquid from being sucked into the pump. The...

Glass Moisture Trap for Chemker Series (replacement part)

* Thick and durable wall of the PP bottle can hold near full vacuum for 24-hours. * Entire bottle is autoclavable at 1 bar and 121°C for 20 minutes...

Universal Foot Switch

The three-way brass ball valve with T-full port and 3ea. 3/8” Hosebarb connections will hold a vacuum in your system, isolate the vacuum pump to pr...

The Tank is Easy to Use: Turn black cap counterclockwise to open Holds up to 5 oil changes Place vacuum pump in the cradle and drain pump Once the...

Bourdon tube vacuum gauge and fittings to add to your Fischer Technical Company lava Series high vacuum pumps. Ships complete with gauge, fittings,...

The gauge features a digital display with solid state circuitry. The vacuum range is 25-12000 microns. It will read in 7 international unites: mi...

This vacuum grease helps provide a proper seal between the vacuum pump plate and the bell jar so that high vacuum pressures can be achieved.

This high vacuum pump oil is recommended for all LAV Series pumps and is provided as a case of twelve (12) quarts and 2 quarts. The LAV pumps have ...

Air Outlet (Copper Muffler) for Rocker Series 600 and 800 Pumps

Air Outlet (Copper Muffler) for Rocker 300, 300DC, 400, 410, 430 & 500 Pumps

Our vacuum pumps are among the highest quality microbiology supplies of their kind. All of our vacuum filtration pumps you see here are oil-free an...

Chemical Resistant Hose Barb, 5/16-inch (8mm) x 1/4 MPT

It is used to exhaust the oil mist out of a room by connecting an optional hose barb (thread 1/8 PT) and a proper tube.

This high vacuum tubing has an ID of 1/2" and can withstand 25 microns of pressure. The tubing set is 5' in length and includes 2 tubing clamps. Ex...

Eliminates smoke from the high vacuum pump exhaust by removing oil mists.Features: Durable Nylon Guard Helps to protect the working environment Re...

Exhaust filter with stainless steel housing is used to prevent oil mist from spraying in the air and keep laboratory clean.

Tanker SC is a special formulation lubricant for Tanker series pumps. It features excellent viscosity, high temperature resistance and strong antio...

Vacuum Regulator/Glass Moisture Trap for Chemker Series (replacement part)